Home About us Technology Products show Contact us  
  Products categories
O-ring
X-ring
Gasket
Household-FDA
watchstrap
Others
  Technology
Meterial-EPDM
2010-11-8   Click : 2326  From : 

Ethylene Propylene Rubber (EPM, EPDM)
EPM is a Copolymer of ethylene and propylene, EPDM is terpolymer of ethylene and propylene with a small amount of a third monomer (usually a diolefin) to permit vulcanization with sulfur. Generally Ethylene Propylene Rubber posses excellent resistance to ozone, sunlight and weathering, and have very good flexibility at low temperature, good chemical resistance (many dilute acids and alkalis, polar solvents), and good electrical insulation property.

SERVIEC TEMPERATURE
For EPDM the service temperature can be designed from -55℃ to 125℃ or up to 150℃ (for peroxide cured systems).

HARDNESS
40 to 90 Shore A are available.

COLOR
Black, brown, green, white, rust, yellow, blue, red, orange, purple and gray are available, or any color we can design for you.

APPLICATION
In phosphate-ester based hydraulic fluids and glycol based brake fluids systems Ethylene Propylene Rubber is good choice for sealing parts. Appling in domestic water, rubber parts must pass the chloramine and chlorine resistance test. It is not suitable for any types Ethylene Propylene Rubber, higher saturated EPDM or EPM and higher ethylene content will be well for chloramine and chlorine attacking. It also usually be used in hot water or steam up to 150℃.
Ethylene Propylene Rubber is not suitable in petroleum fluid (fuels, mineral oils, greases)

Standard Products List

Durometer
Shore A

Color

Polymer

Comments

70

Black

EPDM

Std. Compound M2BA714

70

Black

EPDM

Std. Peroxide Cured Compound M2CA714

70

Black

EPDM

Peroxide Cured for brake fluid, M2DA714

70

Black

EPDM

Std. Compound M2BA714, meet to FDA 21 CFR 177.2600 Class II spc.

70

Black

EPDM

Std. Compound erucamide internal-lubrication

40

Black

EPDM

Peroxide Cured for adhesion metal seal

70

Black

EPDM

Std. Compound M2BA714, meet to FDA 21 CFR 177.2600 Class I (contact with milk & edible oil, carbon black below 10%) spc.

70

Black

EPDM

Std. Peroxide Cured Compound M2CA714, meet to FDA 21 CFR 177.2600 Class II spc.

70

Black

EPDM

NSF61 approval, Peroxide Cured Compound M2DA714

70

Black

EPDM

Peroxide Cured, electric insulation

70

Black

EPDM

Std. Compound M2BA714, meet to FDA 21 CFR 177.2600 Class II spc., MADE IN CHINA

70

Black

EPDM

Peroxide Cured M2CA714, meet to FDA 21 CFR 177.2600 Class I (contact with milk & edible oil, carbon black below 10%) spc.

70

Black

EPDM

Std. Compound, ANTI-MICROBE

【Back】
Copyright ©  Nice Rubber  Co. Ltd All Rights Reserved. 技术支持: 知讯网络
在线咨询
网站建设